Rubber stamping waste causes

Rubber stamping waste Reasons: 1. Rubber stamping areas of poor people quality of recycleables 2. Dies are incorrectly installed and adjusted 3. Precision punching die for lengthy-term use, the appearance of gap changes or their very own work parts and guide parts put on
4. Die because of the impact of vibration when is simply too lengthy, loose parts loose, so the installing of die position relative change 5 power punch. The operator doesn't feed the strip properly across the feed, or feed it in a certain gap 6. Operation error, don't stick to the operating procedures The primary measures to avoid waste: 1 punch unit. Recycleables must satisfy the specified technical conditions (strict inspection of raw material specifications and grades, precision presses in conditional conditions around the dimensional precision and surface quality needs from the work surface for laboratory testing punch out game. 2. For the procedures specified along the way ought to be fully and strictly adhere to every aspect 3. Using presses and dies along with other tooling equipment, should be sure that the operate in the standard condition
4. The development tactic to set up a rigorous inspection system, the very first bits of rubber stamping parts should be an extensive inspection, inspection before passing into production, while strengthening the inspection, when any sort of accident ought to be worked within time 5. Follow the civilized production system, like the work surface and blank transfer must make use of the appropriate station equipment, or chipping and scratching the work surface surface will modify the surface excellence of the work surface 6. Within the rubber stamping tactic to ensure mold cavity cleaning, work to buy the finishing from the work surface to become placed nicely.